Single Screw Extruder Application and features:
Single screw extruder for extruding major soft, hard PVC, polyethylene and other thermoplastic plastic use it with the corresponding
Auxiliaries (including molding head), can process a variety of plastic products,, such as membrane tubes, plates, wire, tape, etc.
Can be used for granulation.
Single-screw extruder advanced design, high output, good plasticization, can low, single-screw extruder involute gear, with noise
Sounds low, stable operation, large capacity, long life.
Single screw extruder main technical parameters:
| Product Name | Aspect ratio | Yield | Screw speed | Drive power | Center height |
| SJ－30/25Plastic Extruder | 25:1 | 1.5-10Kg/h | 15-150rpm | 5.5KW | 1000mm |
| SJ－45/25Plastic Extruder | 25:1 | 5-38Kg/h | 12-88rpm 0-50rpm | 7.5KW | 1000mm |
| SJ－65/25Plastic Extruder | 25:1 | 20-85Kg/h | 13-130rpm | 22/7.3KW | 1000mm |
| SJ－65/25Plastic Extruder | 25:1 | 10-30Kg/h | 0-27rpm | 7.5KW | 1000mm |
| SJ－65/25Plastic Extruder | 25:1 | 10-45Kg/h | 0-37rpm | 11KW 15KW 18.5KW （User selectable） | 1000mm |
| SJ－90/25Plastic Extruder | 25:1 | 50-100Kg/h | 33.3-100rpm | 55/18.3KW | 1000mm |
| SJ－90APlastic Extruder | 25:1 | 30-60Kg/h | 0-30rpm | 7.5KW | 1000mm |
| SJ－90/25BPlastic Extruder | 25:1 | 60-90Kg/h | 0-30rpm | 22KW | 1000mm |
| SJ120－25/Plastic Extruder | 25:1 | 84-190Kg/h | 17-52rpm | 55/18.3KW | 1000mm |
| SJ－150/25Plastic Extruder | 25:1 | 50-300Kg/h | 7-42rpm | 100/75KW | 1000mm |
| SJ－200/25Plastic Extruder | 25:1 | 180-430Kg/h | 5-15rpm 5-30rpm | 100/16.7KW | 1100mm |
-90